Bar shaped and cross over static eliminator
Manufactured by using the latest patented technology of static removing.
Fast speed of static removing, low ion balance and high safety.
LCD on bar body indicates working status for easy use and maintenance
Output voltage adjustable, fit for different static environment.
With alarm function of ion volume, electrode tip cleaning and high voltage fault.

Features

1. Bar shaped and cross over static eliminator

2. Adjustable positive and negative ion output rate

3. Manufactured by using the latest patented technology of static removing

4. Fast speed of static removing, low ion balance and high safety

5. Adjustable positive and negative ion frequency

6. With alarm function of high voltage fault

7. Remote control ion output

8. Shock-proof function prevent user from being electric shocked

◆Specification

Model No.	AP-AB1216
Discharge structure	Resistance coupling
Output frequency	1,3,5,10,20,30,50Hz；(Factory setting:30Hz)
Duty Ratio	10%—90%
Working range	LWH:{385-410(Probe distance 25mm)；460-2960(Probe distance 50mm)}3001000mm
Working distance	100→1000mm
Ion balance	≤\|±30V\|(AVE)
Discharge speed	≤2S
Warning indicate	Power input indicator,High Voltage indicator(Green is normal,Red is abnormal)
Status monitoring	Series network monitoring / wireless monitoring
Airflow pressure	≤0.6MPa
air source connector With throttle valve	Φ8-G1/8 Black
Dimension	LWH:{385-410(Probe distance25mm)；460-2960(Probe distance50mm)}3578.4mm
Bar body material	Flame retardant PVC,ABS,AL,SUS
Accessories	Flexible 180° install bracket
Power adapter	GRT-240200: DC24V 2A,Dual network port output,1236140.5mm(LWH)
Power adapter cable length	2.5m

4. Notice on use and safety warning

Read this manual carefully before installing and using of the device.
Be sure the device reliable ground connected during use, otherwise may cause bar body burn.
Touching of electrode tip during use strictly prohibited.
Do not use this device in the environment where the humidity is greater than 75%.
Input air must be clean and filled air without water, oil and dust particle
It is strictly prohibited to use this equipment in combustible and explosive environment.
Internal maintenance and repair must be carried out by professionals

5. Installation guide

Choose optimal location for discharge and fix the bar and power supply steadily.
Connect earth to earth connect end on ion bar.
Insert one end of the power cord into power adapter and the other end into power port.
Connect air connector to air supply device with tube and turn on the air switch.
Turn on the power switch and adjust proper air pressure.

100mm Static Eliminator Bar Air Source AC Pulse Ionizer AP-AB1216

Static Electricity Eliminator