Shanghai Anping Static Technology Co.,Ltd
Shanghai Anping Static Technology Co.,Ltd
Add to Cart
Shock-proof Static Eliminator Air Source AC Pulse Ion Bar AP-AB1216
Features
1.Bar shaped and cross over static eliminator
2.Adjustable positive and negative ion output rate
3.Manufactured by using the latest patented technology of static removing
4.Fast speed of static removing, low ion balance and high safety
5.Adjustable positive and negative ion frequency
6.With alarm function of high voltage fault
7.Remote control ion output
8.Shock-proof function prevent user from being electric shocked
◆Specification
| Model No. | AP-AB1216 |
| Discharge structure | Resistance coupling |
| Output frequency | 1,3,5,10,20,30,50Hz；(Factory setting:30Hz) |
| Duty Ratio | 10%—90% |
| Working range | L*W*H:{385-410(Probe distance 25mm)；460-2960(Probe distance 50mm)}*300*1000mm |
| Working distance | 100→1000mm |
| Ion balance | ≤|±30V|(AVE) |
| Discharge speed | ≤2S |
| Warning indicate | Power input indicator,High Voltage indicator(Green is normal,Red is abnormal) |
| Status monitoring | Series network monitoring / wireless monitoring |
| Airflow pressure | ≤0.6MPa |
| air source connector With throttle valve | Φ8-G1/8 Black |
| Dimension | L*W*H:{385-410(Probe distance25mm)；460-2960(Probe distance50mm)}*35*78.4mm |
| Bar body material | Flame retardant PVC,ABS,AL,SUS |
| Accessories | Flexible 180° install bracket |
| Power adapter | GRT-240200: DC24V 2A,Dual network port output,123*61*40.5mm(L*W*H) |
| Power adapter cable length | 2.5m |
| 2 | Static removing performance decline obviously | Pollute or damage of discharge pin | Clean or replace discharge pin |
| Electrode pad not tightly screwed | Be sure the electrode pad screwed tightly | ||
| Improper installation position | Confirm the optimum installation position | ||
| 3 | Static removing performance decline | There are conductor or other ion bar around | Remove conductor or other ion bar |
| 4 | HV Alarm | Electromagnetic disturb | Switch off and reset |
| Abnormal discharge | Check installation position and be away from conductors | ||
| Pollute or damage of discharge pin | Send back to manufacturer | ||
| 5 | Smoking or burning | Pollute or damage of discharge pin or electrode pad insulator | Send back to manufacturer |
.
Maintenance
Caution: