Shanghai Anping Static Technology Co.,Ltd
Shanghai Anping Static Technology Co.,Ltd
Add to Cart
400mm Shock-proof Anti Static Ion Bar AP-AB1215 Remote control Ion Output
1.General
AP-AC2459 cross flow ionizing air blower is one of the ion blower series manufactured by Shanghai Anping Static Science & Technology Co.,Ltd.,
AP-AC2459 cross flow ionizing air blower ionizes the air and generates large volume of positive and negative ions by AC high-voltage corona discharge. These ions will be blown to object surface and remove static.
The device can be widely used in electronics, plastic, chemical, printing and optoelectronics industries.
◆Specification
| Model | AP-AB1215 |
| Output voltage | DC±5.00(KV) |
| Output frequency | 5, 30Hz (default) |
| Duty factor | 10%-90% |
| Power | 10W |
| Working distance | 100－1000mm |
| Ion balance | ≤|±30V| (AVE) |
| Discharge time | ≤1S |
| Working temperature | 0℃-50℃ |
| Working humidity | ＜70% |
| Bar Width | 335-410mm(spacing 25mm)；460-2960(Spacing 50mm) |
| Note | USD12.0 Per additional 100mm |
(1) To ensure the good performance of the device, user should clean the electrode every 5-7 days after using. Use a clean cloth dipped in alcohol to remove carbon deposition on discharge electrode and cover net (Notice: This operation must be done 10 minutes after the power is shut down. Restart must be done when alcohol completely volatile after cleaning. Do not use any organic solvents to clean the air blower)
(2) Do not over press and rotate the control button/knobs on front panel. It may cause permanent damage to the device.
(3) Stop using the device when power indication LED turns off. Re-use is available only when after check and repair by professionals
7. After-sale service
(1). AP-AC2459 desktop ionizing air blower is strictly inspected before ex-work and matches the entire related technical standard indicated in this manual.
(2). Warranty:Repair or change any damaged parts caused by quality reasons free of charge within one year from the date of purchase after we confirm the quality issue. But the promise is not fit for the following situation: Alternation of the device, wrongly used or incorrect installation, abasement; negligence and accidental damage; unpacking and repacking by user itself or maintain by other unauthorized service department.
(3). AP&T is free from any related responsibility of products except the parts repair and replacement specified here above.
8. Accessories
(1) User manual
(2) Warranty card
(3) Inspection certificate
Safety warning
(1) Read this manual carefully before installing and using of the device.
(2) Do not use this equipment in the environment where the humidity is greater than 85%.
(3) Do not insert any object into the air input entry and outlet
(4) It is strictly prohibited to use this equipment in combustible and explosive environment.
(5) Internal maintenance and repair must be carried out by professionals